FesixGermany
FesixGermany
  • Видео 38
  • Просмотров 441 548
Last airport TXL ATIS broadcast after closing
This is a recording of the last ATIS broadcast after airport Tegel (TXL EDDT) was closed on November 8th 2020 after BER EDDB airport was finally opened with almost 10 years of delay.
Просмотров: 578

Видео

Moon through small and cheap Bresser telescope
Просмотров 2574 года назад
Bought myself a cheap little Bresser Messier 1400mm Maksutov telescope mounted on a camera tripod and attached my Sony a6500 to it. No cropping of image this is the real magnification, just did some contrast adjustments.
Assembling of linear carriage bearing
Просмотров 1,3 тыс.4 года назад
Quick video of how to reassemble a carriage of a linear ball bearing. This carriage is an LW21 by NSK Japan.
4 Strings - Summer Sun Lasershow
Просмотров 1,3 тыс.4 года назад
After some years of not being used at an event I dug out my first laser projector I built myself back in 2013 and did a quick test in my small corridor. Nothing fancy. Programmed with Dynamics by Tracky Song: 4 Strings - Summer Sun (Ibiza Remix) Hardware used: EasyLase II
ALC60X argon ion gas laser power up
Просмотров 1,6 тыс.4 года назад
Quick video about one of my American Laser Corporation 60X (AlC60X) argon ion laser head and my self made linear power supply. These laser heads are originally from a XEROX 9700 laser printer. More info about these lasers, their history and the power supply in the next video. (link will follow)
ISS SSTV timelapse
Просмотров 4504 года назад
Little timelapse of me receiving two ISS SSTV pictures on 4. August 2019 from the air field Tempelhof in Berlin Germany. DIY 4 element yagi antenna DIY band pass filter Baofeng UV-5R handheld radio Robot36 on android phone for decoding Watch my how to video for more details: ruclips.net/video/JvC-JjsEXxY/видео.html
Drivvin - Breezing By Lasershow
Просмотров 4185 лет назад
Lasershow "Breezing By" by Sören Kruber filmed at the LaserFreak enthusiast meeting near Frankfurt/Main on November 5th 2016. Made with HE-Laserscan. Filmed with a Canon EOS 70D and sound picked up by two Rode NT1. Unfortunately the cameraman (RIP my little brother) forgot to turn off the autofocus. Follow me on Twitter: DIYflixit
Wie ein Laserprojektor funktioniert
Просмотров 28 тыс.5 лет назад
Wie funktioniert ein Lasershowprojektor? Was ist nötig um eine Lasershow zu veranstalten? In diesem Video versuche ich diese Fragen zu klären. Weitere Fragen? Einfach einen Kommentar da lassen. www.laserfreak.net/forum/index.php photonlexicon.com/forums/ Folgt mir auf Twitter: DIYflixit
How a laser show projector works
Просмотров 51 тыс.5 лет назад
How does a laser projector work? What is needed to run a laser show? In this video I try to answer these questions. More questions? Leave a comment. www.laserfreak.net/forum/index.php photonlexicon.com/forums/ Follow me on Twitter: DIYflixit
Sounds of Leybold Turbovac 150
Просмотров 7305 лет назад
High vacuum enthusiast ASMR? Maybe sort of. I just love the sounds the pump makes together with the Turbotronik inverter so I recorded them. Best way to listen is with headphones. Follow me on Twitter: DIYflixit
How to receive ISS SSTV with Baofeng radio
Просмотров 12 тыс.5 лет назад
In this video I show you how to receive SSTV images from the ISS using a cheap Baofeng radio and your smartphone. Follow me on Twitter: DIYflixit I use: Baofeng UV-5R 145MHz band pass filter: yu1lm.qrpradio.com/2m BP FILTER-YU1LM.pdf Yagi antenna: www.qsl.net/dk7zb/PVC-Yagis/4-Ele-2m.htm Some SMA and BNC adaptors Robot36 app 2.5mm to 3.5mm adaptor 3.5mm Y splitter for connecting spe...
How to anodize at home
Просмотров 30 тыс.5 лет назад
In this video I try do describe as good as possible how I anodize aluminum parts at home. Nearly everything needed: www.electronic-thingks.de/en/ Follow me on twitter: DIYflixit
My selfmade stirling engine from a tin can
Просмотров 7995 лет назад
This is the second video about my DIY tin can stirling engine. The original (shitty) video from 2007: ruclips.net/video/0v7OYujxoW0/видео.html Follow me on Twitter: DIYflixit Built from the plans and instructions from the german book "Der Stirlingmotor" by Dieter Viebach. I built this when I was 14 years old with old and worn out tools with little experience but it worked back then ...
Why I love CNC machines: 2047 holes drilled and reamed
Просмотров 3615 лет назад
Imagine doing this by hand: Center drilling, drilling and reaming 2047 holes. Thank god there are CNC machines. I built this machine at work while I was an apprentice together with my colleague. The linear rails and ballscrew assemblies are reused from a scrapped glue dispenser. Stepper motors and drivers are from Trinamic. Spindle is air-cooled 0.7kW with ER11 collet from Mechatron. RaspberryP...
X-Rays From Scotch Stick Tape
Просмотров 2,7 тыс.5 лет назад
Finally I got my vacuum chamber to work and I did the experiment of creating x-rays by unrolling stick tape in high vacuum. Original video: ruclips.net/video/LQBjRF9mX1Y/видео.html Inspiration to try it myself: ruclips.net/video/7sRPUjcd2SA/видео.html Sites in German: www.rapp-instruments.de/diverse/Scotch/Scotch.htm www.hcrs.at/STICKRAY.HTM Follow me on twitter: DIYflixit Tape used...
[GER] ISS Funkkontakt 25.08.2018 Alexander Gerst
Просмотров 1805 лет назад
[GER] ISS Funkkontakt 25.08.2018 Alexander Gerst
[GER] ISS ham radio contact August 13th 2018
Просмотров 3185 лет назад
[GER] ISS ham radio contact August 13th 2018
[ENG] Sennheiser HD 429 repair / changing ear cushions
Просмотров 4 тыс.6 лет назад
[ENG] Sennheiser HD 429 repair / changing ear cushions
ISS SSTV image reception May 7th 2018 (Inter-MAI-75)
Просмотров 2636 лет назад
ISS SSTV image reception May 7th 2018 (Inter-MAI-75)
ISS SSTV reception on May 6th 2018 (Inter-MAI-75)
Просмотров 6876 лет назад
ISS SSTV reception on May 6th 2018 (Inter-MAI-75)
Receiving NOAA weather satellites with simple equipment
Просмотров 7646 лет назад
Receiving NOAA weather satellites with simple equipment
X-rays from gas discharge tube
Просмотров 7386 лет назад
X-rays from gas discharge tube
My collection of radioactive uranium minerals (autunite, uraninite)
Просмотров 3,9 тыс.6 лет назад
My collection of radioactive uranium minerals (autunite, uraninite)
Insomnia 2.0 (Avicii Extended Remix) - Faithless Lasershow by Tschosef
Просмотров 4,3 тыс.6 лет назад
Insomnia 2.0 (Avicii Extended Remix) - Faithless Lasershow by Tschosef
Rize Of The Fenix - Tenacious D Lasershow by Tschosef
Просмотров 1166 лет назад
Rize Of The Fenix - Tenacious D Lasershow by Tschosef
Direct - Lark Lasershow
Просмотров 1,3 тыс.7 лет назад
Direct - Lark Lasershow
Lasershow "Cepheus" (Musik von Fewjar)
Просмотров 3,3 тыс.9 лет назад
Lasershow "Cepheus" (Musik von Fewjar)
Lasershow "Ghost Love Score" 2nd place LaserFreak Award 2010
Просмотров 1,9 тыс.11 лет назад
Lasershow "Ghost Love Score" 2nd place LaserFreak Award 2010

Комментарии

  • @pilotenrr
    @pilotenrr Месяц назад

    Welcher Laser ?

  • @peoplepeoples1001
    @peoplepeoples1001 Месяц назад

    Hallo. Wie können wir Kontakt aufnehmen? Ich habe ein paar Fragen. Kann ich Ihre E-Mail erhalten?

  • @michaelgrabner7179
    @michaelgrabner7179 Месяц назад

    ruclips.net/video/O78dHmzHgP8/видео.htmlsi=RpnCrBsig4OBnRSu

  • @DarkPassionPl
    @DarkPassionPl 2 месяца назад

    Thank you for this vid, it was perfect for my ambilight testing! Much love !!

  • @garrettwright6431
    @garrettwright6431 4 месяца назад

    Where do I need to go in order to start building my own laser projectors?

  • @timgesner6916
    @timgesner6916 6 месяцев назад

    This is inspiring to get into laser lighting

  • @user-nk5rd3nc5j
    @user-nk5rd3nc5j 6 месяцев назад

    Hello! where i can the documentation for TurboVac 150?

  • @Boogie_the_cat
    @Boogie_the_cat 7 месяцев назад

    I'm thinking about buying a smallish line scanning show laser and you video helped me understand the tech. Thanks.

  • @spieldings
    @spieldings 8 месяцев назад

    Hammer!

  • @Issac4tech
    @Issac4tech 8 месяцев назад

    What did you study

  • @AdvancedTinkering
    @AdvancedTinkering 9 месяцев назад

    Sehr schönes Video und tolle Tonaufnahmen!

  • @himonishtabhane2312
    @himonishtabhane2312 11 месяцев назад

    Can i get the video how you made your diy laser machine

  • @krollfrank6281
    @krollfrank6281 Год назад

    Grüße dich, habe ein paar Videos von dir gesehen wo du Dinge ganz gut erklärst. Kann ich dich einige Sachen fragen? Wenn ja bitte eine Nachricht an mich. Bis dahin Grüße

  • @josephamarante675
    @josephamarante675 Год назад

    Distilled water only!!

    • @FesixGermany
      @FesixGermany 11 месяцев назад

      I used DI water but then I tried normal tap water and it worked just as fine...

  • @borisbellone5833
    @borisbellone5833 Год назад

    Una radiografia con la pechblenda di marie curie ruclips.net/video/TFi5bLrbBJ4/видео.html

  • @DoodieSmoothie
    @DoodieSmoothie Год назад

    0:15 looks so trippy in the center. wow!

  • @Ano-Nymos
    @Ano-Nymos Год назад

    Hallo. Kann jeder Laserprojektor Texte darstellen? Was ist mit dem Szenario dass Aktivisten etwas auf Gebäude projizieren wollen. Das ist in Deutschland nicht verboten. Ein G8-AKtivist bekam sogar eine Entschuldigung des Hamburger Polizeichef mit Hinweis, dass die Polizistin wegen Freiheitsberaubung und Nötigung einen Strafbefehl über 200 Euro zahlen musste. Beamer müssten dafür sehr hell sein. 4000 ANSI-Lumen aufwärts und dann erst ab der Dämmerung? Dazu braucht man einen teuren großen Lithium-Akku für 500, 500, 800, 1000 Euro. Wäre da ein Laserprojektor nicht effizienter? Und welche Hardware für welchen Preis (gebraucht?) wäre da nötig? Tatsächlich gibt es Geräte mit XLR-Anschluss, auch wenn der Text das nicht zeigt, und nur der Centronics erwähnt wurde. Ein z.B. EL-2005 DMX kostet ab 33 Euro. Da fehlt dann aber sicher noch etwas dass den XLR-Input versorgt, und ob so etwas Text darstellen kann, keine Ahnung. Man bedenke, es gab auch mal "Guerilla-Beam". Low-Tech. Ein 3D-Druck mit einfacher Linse (zusätzlich auf Ali etc. kaufen), den man vorne auf eine Taschenlampe (helle LED-Taschenlampe, gibt ja auch kleine mit echten 1000 Lumen) setzt. Man braucht Einsätze wie Dias in Form von Plättchen die an den Stellen wo Licht durch soll offen sind. Also z.B. 3D-Drucke oder mit Laser etc. geschnittenes Metall. Digital wäre so etwas natürlich flexibler... Und ein Laserprojektor müsste wohl nicht scharf gestellt werden, und sollte einfacher in der Größe des Bildes zu regulieren sein als ein normaler Projektor. Denn da braucht man für einen größeren Abstand wohl ein Spezialobjektiv, damit das Bild nicht viel zu groß wird. Durch die Videoprojektoren die sich "Laserprojektor" nennen, sind z.B. auf Aliexpress in der Suche nur solche Projektoren zu finden, wenn man die erwähnten Angebote aus China mal sehen will.

  • @ButterKing-28
    @ButterKing-28 Год назад

    2:21 they aren't supposed to though...

    • @FesixGermany
      @FesixGermany Год назад

      They are, this is called "audience scanning"

    • @ButterKing-28
      @ButterKing-28 Год назад

      ​@@FesixGermanyoh, i thought that was agenst FDA regulations, i thought it had to be at least 3 feet above the crowd where if they jump up they can't hit it...

  • @melvutten2029
    @melvutten2029 Год назад

    so, im kinda new to lasers, but a dream of mine is to one day make my own light shows using DMX stuff. So im just wondering, what is the cheapest way to get a starter laser. Is it work it to buy one from laser world, like the EL 400RGB mkII? the video was very helpful, thank you sir!

  • @Thedominoguy768
    @Thedominoguy768 Год назад

    Fun fact laser is short fore Light Amplification Stimulated Emission Radiation

  • @Thedominoguy768
    @Thedominoguy768 Год назад

    I can’t get no sleep!!!

  • @barralibre1571
    @barralibre1571 Год назад

    Great video

  • @sinamorgenstein4254
    @sinamorgenstein4254 Год назад

    Lübeck Stockelsdorf ABACO war schon ein Highlight.

  • @revers1972
    @revers1972 Год назад

    Good Job nice,very well explained...

  • @svenschoffel5863
    @svenschoffel5863 Год назад

    Auch nach drei Jahren sehr faszinierend, danke dafür!!

  • @electricsupercarsolarionic4070
    @electricsupercarsolarionic4070 2 года назад

    I want to buy this mineral autunite from you? for how much you sell?

  • @Grandkidsmovies
    @Grandkidsmovies 2 года назад

    This work/display on screen or in air open sky?

  • @freyafoxmusic
    @freyafoxmusic 2 года назад

    Thank you thank you . What about fb4 control

    • @FesixGermany
      @FesixGermany 2 года назад

      Unfortunately I do not have any experience with Pangolin software or hardware

  • @iuntghikk9387
    @iuntghikk9387 2 года назад

    Cata putere are uraniul la ardere an centra nucleara

  • @FilmerVomDienst
    @FilmerVomDienst 2 года назад

    Super Video! Hätte mal eine Frage. Habe dir auf Twitter geschrieben :)

  • @GrandmasterUV
    @GrandmasterUV 2 года назад

    Very Awesome Thanks Man!!!!!

  • @sinapeyer6422
    @sinapeyer6422 2 года назад

    Super verständlich erklärt. Finde sowas ja total interessant. Danke für dein Video 👍🤗

  • @stevesolarez3473
    @stevesolarez3473 2 года назад

    Ok

  • @MechInvent
    @MechInvent 2 года назад

    Can these be tightened?

    • @MechInvent
      @MechInvent 2 года назад

      If I had to guess no, it's machined in. But who knows

  • @dmay9081
    @dmay9081 2 года назад

    Can a Lazer light make a circle, like a 1 mile around on the ground circle?

  • @SlingShotNinja
    @SlingShotNinja 2 года назад

    Thank you so much

  • @klubcj
    @klubcj 2 года назад

    Is the Chinese laser any good ? I saw some with very good price

  • @propopopa6869
    @propopopa6869 2 года назад

    That looks awesome why doesn't this have more views and I wonder the wattage of those lasers

    • @FesixGermany
      @FesixGermany 2 года назад

      Should be about 2-3W each, maybe a bit more but I can't remember

  • @propopopa6869
    @propopopa6869 2 года назад

    Damn

  • @sidneialves7196
    @sidneialves7196 2 года назад

    Absolutly, amazing!! Love It! 👏👏👍👍😁😁

  • @fredycardenas7588
    @fredycardenas7588 2 года назад

    Hello friend, how much does a laser like this cost?

  • @alan_urmjoserangelalternat1278
    @alan_urmjoserangelalternat1278 2 года назад

    Amazing

  • @RelivitMedia
    @RelivitMedia 2 года назад

    Do you have a recommendation for a laser animation projector that is generally safe for just fun home use that we could put ILDA animations on it using a SD Card? We are just looking for something to "carefully" play around with in the basement on the wall. We like the idea of being able to put different animations into the laser with an SD Card - Christmas animations, animals etc... Thanks for your great video too!

  • @emmalightlaser5652
    @emmalightlaser5652 3 года назад

    cool

    • @dmay9081
      @dmay9081 2 года назад

      Can it make a 1 mile on the ground circle, well oblong circle?

  • @acidfz1031
    @acidfz1031 3 года назад

    Is smoke essential for laser light show?

    • @FesixGermany
      @FesixGermany 3 года назад

      If you want to see the beam, yes absolutely.

  • @Modde-ne3zi
    @Modde-ne3zi 3 года назад

    hi habe mir ne laser bar bestellt mit der laser stufe 2m für ne private party ist der laser für augen sehr gefährlich?

  • @ralphyrocket5770
    @ralphyrocket5770 3 года назад

    Much Needed Info!

  • @jhrlasers
    @jhrlasers 3 года назад

    Can you explain the #BeamBrush things from Pango 🤩🥰... You should check them out man😃

  • @florasakura3045
    @florasakura3045 3 года назад

    Ich habe das selbe Messgerät. Und ein paar solcher mineralien. Jedes zählrohr scheint andere umrechnungsfakroten zu haben. Und wie bekommt man brauchbare Ergebnisse aus den veralteten Einheiten? Die Umrechnung von mrem zu msv ist durch 100. Und um auf die jahresdosis zu kommen hat jedes rohr dann eigene Multiplikatoren. Zumindest las ich das so. Vg

    • @FesixGermany
      @FesixGermany 3 года назад

      Leider kann man die Einheiten nicht genau umrechnen aber zumindest annähern wobei 1 Röntgen etwa 0,01 Gray Dosisleistung entspricht, wenn man nur Gammastrahlung misst (und das tut das FH40T indem es eine Blende innen vorschiebt um Betastrahlung zu blocken) dann kann man sagen, dass das etwa so viel ist wie die Äquivalentdosis in Sievert also 1R/h entspricht etwa 0,01Sv/h, damit ist abgelesener Wert durch 100 um auf Sievert zu kommen schon richtig. Richtig ist auch, dass jedes Rohr unterschiedlich empfindlich ist, für das FH40T gibt es zwei Rohre, ein mal das FHZ76V für 1R/h und das FHZ74V für 50R/h, je nachdem welches man einsetzt kann man auch nur die entsprechende Anzeige am Gerät auswählen.

  • @MTXODIN
    @MTXODIN 3 года назад

    Tippi toppi, nutze auch usb to ilda noch von medialas, funktionieren halt sehr gut. Da ich auch oben air lasershow fahre bin ich vor einiger Zeit an die Grenzen der ilda Kabellänge gestoßen, dieses habe ich durch eine innovative Box Netzwerk to USB lösen können, es funktioniert sehr sehr zuverlässig. Da ich keine weitere Schnittstelle nachrüsten wollte, war das technisch eines der besten Lösungen ... Netzwerkkabeltrommel oder dsnake ran und fertig... egal wo das FOH steht. Lg